Equipment · Ontario

Equipment Financing in Ontario

Short answer

Equipment financing for businesses in Ontario typically ranges $10,000 – $2,000,000, funds in 2 – 5 business days, and is priced at aPR roughly 7% – 30%. Usual minimums are 6 months – 2 years and a credit score of 600+ typical; AIDBIZ matches Ontario businesses with funding partners for this product with no hard credit pull to apply.

Updated September 21, 2026 · market ranges reviewed monthlyRead next: Business Loan Requirements by Product (2026)

Across Ontario, equipment financing is sized for Canada’s largest provincial economy — Toronto’s financial and technology base, the auto and EV supply chain, a $17.60 indexed wage floor and 13 percent HST — under the federal criminal-rate cap rather than a disclosure statute. Put a specific machine, vehicle or system to work while the asset itself carries most of the underwriting weight.

$10,000 – $2,000,000Typical amount
2 – 5 business daysPublished timing
600+ typicalCredit guideline
2 – 7 years, matched to the equipment's useful lifeTerm

Local funding context

Why Ontario businesses consider equipment financing

Ontario requests for equipment financing come from the automotive and EV supply chain of southwestern Ontario, the contractors, restaurants and professional firms of the Greater Toronto Area, technology vendors in Toronto, Waterloo and Ottawa, federal contractors in the capital, trucking and logistics companies along Highway 401 and around Pearson, healthcare and dental practices across the province, manufacturers in Hamilton, London and the 401 corridor and the hospitality operators of Niagara, Muskoka and Prince Edward County.

Costs are the highest in Canada in the GTA and moderate elsewhere. Ontario’s minimum wage is $17.60 and indexed each October, HST is 13 percent, WSIB premiums and Employment Standards Act leave entitlements apply and Toronto commercial rents and housing costs lead the country, but the small-business corporate rate is 12.2 percent on the first $500,000 of income and rents in London, Windsor, Kitchener and the north remain reasonable.

Ontario has no commercial financing disclosure law. Business credit falls outside the Consumer Protection Act’s cost-of-borrowing rules, and the only hard limit is the federal criminal interest rate — 35 percent APR since 2025, with commercial loans above $10,000 exempt up to 48 percent — so disclosures on merchant cash advances, factoring and short-term loans depend on the provider. Ontario owners should insist on the total repayment amount, an annualized cost, the term, the payment schedule and prepayment terms in writing and compare offers on dollars repaid.

The Business Development Bank of Canada serves Ontario from Toronto and regional offices, the Canada Small Business Financing Program guarantees loans through the banks and credit unions, Export Development Canada backs exporters and FedDev Ontario, the province’s Small Business Enterprise Centres, the Community Futures network in rural areas and Futurpreneur for founders under 40 add loans and counselling.

Ontario’s small-business map runs from Toronto’s Bay Street, King West, Queen West, the Danforth and the immigrant business corridors of Scarborough, Brampton and Markham, the Pearson airport and Peel Region logistics belt, west along the 401 through Mississauga, Kitchener-Waterloo’s technology corridor, London and Windsor’s auto plants, the QEW through Hamilton’s steel and healthcare economy to Niagara’s wineries and tourism, north on the 400 to Barrie and Muskoka’s cottage country, and east to Kingston and Ottawa’s federal and technology districts.

Equipment financing in local practice. In Ontario, manufacturers finance CNC machines, packaging lines and automation, frequently with vendor-arranged programs; contractors finance excavators, skid steers, lifts and work trucks against the equipment itself, protecting bonding capacity. Carriers and owner-operators finance tractors, trailers and reefers with the truck as collateral, often with mileage and age limits.

What to evaluate

  • New or used business equipment may qualify
  • The financed asset commonly supports the transaction
  • Terms can be aligned with the asset's useful life
  • Vehicles, kitchen, medical, manufacturing, and technology equipment may be considered
Ontario regions, sectors and funding patterns
RegionSignature sectorsFunding pattern
Greater Toronto AreaFinancial and technology vendors, construction, restaurants, logistics around PearsonLines and factoring for vendors; equipment and lines for contractors; working capital for restaurants; equipment for carriers
Southwestern OntarioAuto and EV suppliers, manufacturing, agriculture, Windsor cross-border tradeEquipment financing, PO financing, factoring
OttawaFederal contractors, technology, healthcareFactoring and lines for government vendors; SBA-style CSBFP loans for practices
Hamilton, Niagara and the northSteel, healthcare, tourism, mining suppliersEquipment loans, seasonal working capital, factoring

How it works

How equipment financing works in Ontario

Equipment financing is a purchase-money structure: a lender or lessor pays the vendor for a defined piece of equipment, and the business repays a fixed schedule over a term matched to the useful life of that asset. The equipment itself is the primary collateral, which is why underwriting leans on the invoice, the asset type, its resale market and its age rather than purely on the owner’s credit file. A Ontario contractor buying a used excavator and a dental practice financing a new CBCT scanner go through the same basic mechanics even though the assets could not be more different.

Two legal forms dominate. An equipment loan gives the business title from day one with a lien held by the lender until the balance is paid. An equipment lease keeps title with the lessor; a $1 buyout lease behaves almost exactly like a loan, while a fair-market-value lease has lower payments and an end-of-term choice to return, renew or purchase. Both show up on the same marketplace quotes, so a Ontario business should ask which form is being offered before comparing rates, because the tax treatment, the balance-sheet treatment and the end-of-term obligations differ.

Published guidelines allow financing of up to 100% of the equipment cost, and many lenders will fold in soft costs such as delivery, installation, training or an extended warranty when the total stays within a reasonable share of the hard-asset value. Terms generally run two to seven years. Shorter terms suit fast-depreciating technology; longer terms suit heavy machinery, commercial vehicles and medical devices that hold value. Payments are almost always monthly and fixed, which makes them easy to budget alongside rent and payroll in Ontario.

Cost structure

What equipment financing costs: a $183,000 worked example

Equipment financing is quoted as an APR in most cases, with a published market range of roughly 7% to 30%. Where a quote lands inside that range depends on the age and type of equipment, the down payment, the borrower’s time in business and credit, and whether the vendor is a recognised manufacturer or dealer. A five-year loan on new titled equipment for an established Ontario company tends to price near the low end; a two-year deal on used, specialised equipment for a young business prices higher.

Worked example for Ontario: on a $183,000 purchase repaid over 60 months, the published range implies a monthly payment between $3,624 and $5,921, with total payback of roughly $217,417 to $355,240. The midpoint of the range works out to about $4,697 per month and $281,815 in total. The estimator below lets you change the amount to match the actual quote you are holding, but treat every figure as illustrative: origination or documentation fees (typically a few hundred dollars to about 2% of the amount financed), sales tax on the asset and any required insurance sit outside the rate.

A useful way to judge affordability is to compare the monthly payment with the revenue or savings the equipment produces. If a $183,000 machine replaces Ontario subcontractor spending or adds billable capacity that clearly exceeds the payment, the financing is doing its job even at the upper end of the range. If the case relies on optimistic utilisation, a smaller purchase, a used unit or a longer term may be the wiser path.

Payment estimator

Estimate equipment financing payments for a Ontario business

Illustrative equipment financing figures for $183,000 using published market ranges. Actual offers depend on underwriting and the funding partner.

Equipment financing: $183,000 at market range
ScenarioEstimated paymentTotal paybackBasis
Lower end of range$3,624 / month$217,4177.0% APR
Midpoint$4,697 / month$281,81518.5% APR
Upper end of range$5,921 / month$355,24030.0% APR

Secure eligibility check

Fast Funding Review

Share a few details about your Ontario business and the equipment financing amount you have in mind to start a confidential, no-obligation review. This step does not use a hard credit pull.

  • No hard credit pull to apply
  • Decisions typically in 24–72 hours
  • 5+ years in the industry
  • Encrypted, private document handling

Qualification

Equipment financing qualification guidelines

Published market guidelines, not AIDBIZ approval rules; a Ontario business weak in one row can often still qualify when the others are strong.

Equipment financing qualification guidelines (market ranges)
CriterionTypical guidelineWhy it matters
Time in business6 months to 2 years; startups considered with strong equipment and a down paymentNewer businesses are offset by the collateral value of the asset
Credit score600+ typical; strong equipment and vendor relationships can offset weaker creditLower scores usually mean a higher rate or a larger down payment, not an automatic decline
Down payment0% to 20% of the purchase priceMoney down reduces lender exposure and the rate; used or specialised assets need more
Equipment type and ageTitled vehicles, machinery, medical, restaurant and technology equipment; age limits apply to used unitsResale value and a clear secondary market drive approvals
Revenue and cash flowEnough deposits to cover the new payment comfortably; equipment value carries weightLenders want the payment covered before the asset produces income
Amount$10,000 to $2,000,000 (up to 100% of cost)Larger amounts bring full financial statements into the file

Documents

Documents an equipment lender expects

Having these ready is the biggest factor in hitting the published 2 – 5 business days timing in Ontario.

  • Equipment quote, invoice or purchase agreement naming the vendor and the exact model
  • 3 to 6 months of business bank statements
  • Government-issued ID for each owner with 20% or more
  • Most recent business tax return for larger amounts
  • Year-to-date profit-and-loss and balance sheet above roughly $150,000
  • Vendor details and, for used equipment, the serial number, hours or mileage and condition photos
  • Proof of business insurance naming the lender once approved

Timeline

From quote to delivery: the equipment financing timeline

1

Get a firm quote

Ask the dealer or vendor for a written quote with model, serial number where known, delivery and installation costs. The financing amount is built from this document.

2

Submit the file

A short application plus bank statements and ID is enough for most quotes under $150,000. Larger or used-equipment requests add tax returns and financials.

3

Underwriting and asset review

The lender checks the equipment’s resale market, age and condition, then reviews deposits, existing debt and credit. Published timing is 2 to 5 business days.

4

Approval and documents

The offer states the structure (loan or lease), term, payment, down payment, fees and end-of-term terms. Sign, pay any deposit and provide the insurance certificate.

5

Vendor funded, equipment delivered

The lender pays the vendor directly. The first payment usually falls 30 days after funding, so plan installation and training inside that window.

Fit

Best uses and watch-outs for Ontario buyers

Best uses

  • Commercial trucks, vans and trailers
  • Construction and landscaping machinery
  • Kitchen, refrigeration and food-processing lines
  • Medical, dental and veterinary devices
  • CNC, packaging and manufacturing equipment
  • Point-of-sale, IT and telecom systems

Watch-outs

  • The equipment is collateral and can be repossessed after default
  • Soft costs such as installation and delivery may not be fully covered
  • Section 179 and bonus-depreciation treatment depend on structure; confirm with an accountant
  • Fair-market-value leases have end-of-term decisions that can add cost
  • Used-equipment age limits and inspection requirements vary widely

Best for: Vehicles, machinery, medical or restaurant equipment, technology.

Alternatives

Alternatives to equipment financing in Ontario

Compare the products a Ontario business is most likely to be offered alongside equipment financing; each guide below sets out structure, timing, credit guidelines and uses side by side.

Common questions

Equipment financing in Ontario: what owners ask

What equipment may qualify?

Equipment Financing can support buying or upgrading equipment, vehicles, or machinery. The exact structure, eligible use, documentation, and terms depend on underwriting and the selected offer.

Will I need a down payment?

The published guideline is 24–72 hours, but complete documents, verification, underwriting, and partner capacity determine actual timing.

Can used equipment be financed?

The published credit guideline is 580+. It is not an approval guarantee; revenue, time in business, cash flow, existing obligations, and product rules also apply.

Does Ontario require disclosure of the total cost of equipment financing?

No. Business credit is outside the Consumer Protection Act and there is no commercial financing disclosure statute; the federal criminal interest rate (35 percent APR, commercial exemption to 48 percent above $10,000) is the only cap, so ask each provider in writing for the total repayment amount, an annualized cost, the term, the payment schedule and prepayment terms.

Which Ontario industries use equipment financing most?

Auto and EV suppliers, contractors and home-services firms across the GTA, trucking and logistics companies on the 401 and around Pearson, restaurants and hospitality operators, technology and federal-contract vendors in Toronto, Waterloo and Ottawa and healthcare and dental practices.

Where can Ontario businesses get free help before applying?

BDC’s advisory services, the Small Business Enterprise Centres in most municipalities, FedDev Ontario, the Community Futures network in rural areas, Futurpreneur for founders under 40 and the Ontario Chamber of Commerce network.

Will I need a down payment for equipment financing in Ontario?

Published guidelines run from 0% to about 20% down. Established businesses buying new, widely resold equipment often see 0% to 10%; younger businesses or specialised assets are asked for more. A down payment also lowers the rate and monthly payment.

Does equipment financing require a personal guarantee?

For most small businesses, yes. The equipment is the primary collateral, but a personal guarantee from owners with a meaningful stake is standard unless the company is large and well capitalised.

What happens if the equipment breaks or becomes obsolete?

The payment obligation continues regardless. Warranties, service contracts and insurance are your protection, and lenders usually require insurance naming them as loss payee. Match the term to the realistic useful life so you are not paying for a machine you no longer use.

Can I finance equipment from a private seller in Ontario?

Some lenders will, with an inspection, a bill of sale and proof of clear title; many prefer dealer or manufacturer sales because the asset and price are easier to verify. Ask before you agree to a private purchase.

Call nowCheck eligibility